Ariel JGJ Series User Manual

FOR MODELS: JGW, JGR AND JGJ SECTION 7 - APPENDICES
PAGE 7 - 2 1/01
Minimum Hand Tools Required
The following hand tools are normally all that is required to work on Ariel JGW, JGR and JGJ
compressors. These are in addition to the Ariel furnished and optional tools listed above.
Please contact Ariel if you have any questions about tools for Ariel units.
• 1/2" Square Drive Ratchet Wrench
• 2" and 6" Extensions for above Ratchet
• 1/2" Square Drive Breaker Bar
• 1/2" Drive Speed Wrench
• 1/2" Female x 3/4" Male Adaptors
• 1/2" Square Drive Universal Joint
• 3/8" Square Drive Torque Wrenches (10 LB-IN to 250 LB-IN)
• 1/2" Square Drive Torque Wrenches (15 LB-FT to 250 LB-FT)
• 3/4" Square Drive Torque Wrench (to 1590 LB-FT)
• 5/16", 3/8", 7/16", 1/2", 9/16", 3/4", 5/8” and 15/16" 12 Point Sockets for a 1/2" Square
Drive Ratchet Wrench
• 1/2" Hex Key and 1/4" Hex Key (Allen) Sockets for a Square Drive Ratchet Wrench
• 5/16" - 12 Point Box Wrench
• 1/2" x 9/16" Open End Wrench
• 3/8" x 7/16" Open End Wrench
• 7/8" x 15/16" Open End Wrench
• 2 - Medium Size Screw Drivers
• Bobbitt or Plastic-Faced Slugging Hammer
• Set of 3/8" 12 Point Drive Sockets
• 3/8" Square Drive Ratchet Wrench

Ariel JGJ Series Specifications

General

Brand	Ariel
Model	JGJ Series
Category	Air Compressor
Language	English