Failure to follow the warning indicates the
risk of causing damage, in certain very
serious circumstances, to objects, plants
and animals.
Failure to follow the warning instructions presents
a risk of injury to persons, even in certain fatal
circumstances.
Legend symbols:
4 /
Injuries due to falls from a height or due to
cuts (double stairs).
Install the appliance on a solid, non-vibrating
wall.
Electric shock on contact with live
conductors, incorrectly installed.
Injuries due to falls from a height.
Do not damage when drilling the existing
wall, electrical cables or pipes.
Use hand tools and appliances suitable
for use (especially make sure that the tool
is not damaged and that the handle is fully
and correctly fixed), use them correctly,
make sure that they do not fall from a
height, after use put put them in their place.
Use suitable electrical appliances (especially
make sure that the socket and the power
cord are intact and that the parts with a
rotary or reciprocating motor are
Injuries due to falls from a height.
Make the electrical connections with
conductors of suitable section.
Injuries caused by bumps, obstructions, etc.
Protect pipes and connecting cables to
prevent damage to them.
Injuries due to splinter or fragment
projections, dust inhalation, bumps, cuts,
punctures, scratches, noise, vibration.
SAFETY RULES
Make sure that the portable ladders are well
supported (stable), that they are sturdy, that
the steps are full and non-slip, that they will
not be moved with them, that someone is
supervising them.
Damage to the device or objects around it
due to splinter design,
Make sure that the installation environment
and the installations to which the appliance
is to be connected comply with the
applicable regulations.
Damage to the appliance due to improper
operating conditions.
Make sure that the castle stairs are well
supported (stable), sturdy, that the steps
are complete and non-slip, that they have
railings along the ramp and parapets on the
platform.
Noise during operation
Damage to the device or objects around it
due to the design of splinters, bumps, cuts.
Make sure that in the case of work at a
certain height (generally more than two
meters above the level), support bars
(parapets) have been provided in the work
area or individual safety belts capable of
preventing the fall, that in the space there
are no dangerous obstacles to a possible
fall, as the impact will be attenuated by semi-
rigid or deformable stopping surfaces.
Electric shock on contact with live
conductors. Explosions, fires or poisoning
due to gas leaks through damaged pipes.
Damage to existing installations. Floods
due to water leaks through damaged pipes.
Injuries due to splinter or fragment
projections, dust inhalation, bumps, cuts,
punctures, scratches.
properly secured), use them correctly, do
not cross the pipes with the power cord,
make sure they do not fall from a height,
disconnect them and replace them after use.
Make sure that the workplace has
adequate hygienic and sanitary conditions
in terms of lighting, ventilation, solidity.
Fire due to overheating due to the passage
of electricity in undersized cables.
Electric shock on contact with live
conductors. Explosions, fires or poisoning
due to gas leaks through damaged pipes.
Damage to existing installations. Floods
due to water leaks through damaged pipes.
GENERAL
Damage to the device or objects around it
due to the design of splinters, bumps, cuts.
Protect the machine and areas near the
workplace with suitable material.
Machine Translated by Google
To Next Page
Loading...
Need help?
General
