Page 18
User Manual for CD72/95/15003
U
PLOADING AND DOWNLOADING IN THE CD
72
AND
THE CD
95
The CD72 and CD95 series has the option of controlling, modifying and programming the alarm
system remotely by the installer. With the use of a modem messages can be sent from the control
panel to a personal computer (PC), called uploading, and from a PC to the control panel, called down
loading. Uploading and downloading is therefore a quick and handy aid to easily discovering and
solving problems.
A connection can be established in the following ways:
1 . By dialling into the alarm system. The installer dials in to your alarm system. The dialler will
then accept and check whether the connection can be established. The dialler then calls
the installer back. This ensures that nobody other that the installer can gain access. When
the connection has been established
‘OK’
appears in the display.
2. By entering a up/down (U/D) load code. This is a code which you can enter when the
display is showing the time and date. If the code is correct, ‘
OK’
appears in the display and
the dialler then calls your installer and establishes a connection.
When the connection has been established
‘U/D code’
appears in your display. You can no longer
control your system from that moment until the time and date reappear in the display.
To Next Page
Loading...
Need help?
General
