Aruba Instant On AP11D User Manual

2 Aruba Instant On AP11D Access Point | Installation Guide
LEDs
The AP11D access point has three LEDs that indicate the system, radio and PSE status of the device.
The PSE LED indicates when the access point is operating as Power Sourcing Equipment (PSE), providing Power
over Ethernet (PoE) to an external device that is physically connected to the E3 port by Ethernet cable.
Table 1 AP11D Access Point LEDs Status
Figure 2 AP11D (rear view)
LED Color/State Meaning
System No Lights Device has no power
Blinking Green Device is starting
Alternating Green/Amber Device is ready for setup
Solid Green Device is ready
Solid Amber Device has detected a problem
Solid Red Device has an issue- immediate action required
Radio No Lights Wi-Fi is not ready, wireless clients cannot connect
Solid Green Wi-Fi is ready, wireless clients can connect
PSE No Lights Device is not supplying PoE, or powered off
Solid Green Device is supplying power to a connected device
Blinking Green Negotiating PoE power supplied to a connected device
Pass-Through (PT) PortE0 Port

Aruba Instant On AP11D Specifications

General

Brand	Aruba
Model	Instant On AP11D
Category	Wireless Access Point
Language	English