6 Issue 2008-11-13 1004935-US-1.0
3 Introduction
This manual contains the necessary details and instructions for the installation, main-
tenance and service of the Besam PowerSwing.
The Besam PowerSwing is suitable for most types of external and internal swing
doors. The operator can be mounted to walls on either side of the door for pull or
push action and is suitable for single or double doors fitted with butt hinges or pivots.
It can also be installed on the door leaf.
The motor, oil pump and hydraulic unit are combined into a compact unit mounted
alongside the control unit within the cover. The operator is connected to the door leaf
with a range of different arm systems.
Each installation is, however, unique and must therefore be equipped and adjusted for
the application-relevant safety requirements, just like maintenance must be per-
formed as specified for the selected product in a given environment.
To Next Page
Loading...
Need help?
General
