Asus B150M-A User Manual

ASUS B150M-A D3
1-21
13. Chassis intrusion connector (4-1 pin CHASSIS)
Thisconnectorisforachassis-mountedintrusiondetectionsensororswitch.Connect
one end of the chassis intrusion sensor or switch cable to this connector. The chassis
intrusionsensororswitchsendsahigh-levelsignaltothisconnectorwhenachassis
componentisremovedorreplaced.Thesignalisthengeneratedasachassisintrusion
event.
Bydefault,thepinlabeled“ChassisSignal”and“Ground”areshortedwithajumper
cap.Removethejumpercapsonlywhenyouintendtousethechassisintrusion
detection feature.
B150M-A D3
B150M-A D3 Chassis intrusion connector
+5VSB_MB Chassis Signal GND
CHASSIS

Asus B150M-A Specifications

General

Brand	Asus
Model	B150M-A
Category	Motherboard
Language	English