English
31All-in-one PC ET2013 Series
Powering on the system
Connect the supplied AC adapter to the DC IN jack on the rear panel (
1
2
3
) and then press
the Power button on the front panel (
4
) to turn on the system.
4
Powering off
• To put the system into suspend mode, press the Power button on the front panel. To
bring the system back to the OS, press the Power button again, click the mouse, or press
any key on the keyboard.
• To shut down the system completely, follow the normal Windows shutdown process.
• In the event of a system failure, press and hold the Power button for at least five
seconds until the system shuts down.
WARNING! DO NOT connect the AC power cord to an AC outlet prior to connecting the DC plug
to the system. Doing so may damage the AC-DC adapter.
To Next Page
Loading...
Need help?
General
