A Appendix
A-6
System BIOS Settings (cont.)
Password Check
Select whether to ask for
a password during bootup
(Always) or only when
entering the BIOS setup
utility (Setup).
Select the level of access
to allow the “User Pass-
word” to have in the BIOS
setup utility.
User Access Level
Save Changes
If you want to keep your
conguration settings, you
must save changes before
exiting the BIOS setup
utility.
If you want to restore
default settings, choose
Load Setup Defaults. You
must then save changes
to keep the manufacture
default settings.
Select Screen
Select Item
EnterChange
F1 General Help
F10 Save and Exit
ESC Exit
v02.61(C)Copyright1985-2006,AmericanMegatrends,Inc.
BIOS SETUP UTILITY
Security
Security Settings
Supervisor Password : Installed
User Password : Installed
ChangeSupervisorPassword
User Access Level [Full Access]
ChangeUserPassword
Clear User Password
PasswordCheck [Setup]
Setup:Checkpassword
whileinvokingsetup.
Always:Checkpassword
whileinvokingsetup
aswellasoneach
boot.
Options
Setup
Always
Select Screen
Select Item
EnterChange
F1 General Help
F10 Save and Exit
ESC Exit
v02.61(C)Copyright1985-2006,AmericanMegatrends,Inc.
BIOS SETUP UTILITY
Security
Security Settings
Supervisor Password : Installed
User Password : Installed
ChangeSupervisorPassword
User Access Level [Full Access]
ChangeUserPassword
Clear User Password
PasswordCheck [Setup]
Setup:Checkpassword
whileinvokingsetup.
Always:Checkpassword
whileinvokingsetup
aswellasoneach
boot.
Options
No Access
View Only
Limited
Full Access
Select Screen
Select Item
Enter Go to Sub Screen
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
v02.61(C)Copyright1985-2006,AmericanMegatrends,Inc.
BIOS SETUP UTILITY
Main Advanced Security Power Boot Exit
Exit Options
Exit&SaveChanges
Exit&DiscardChanges
DiscardChanges
Load Setup Defaults
Exit system setup after
savingthechanges.
F10 key can be used for
thisoperation.