Conguring a static IP network connection
To congure a static IP network connection :
1. Repeat steps 1 to 4 of the previous section.
2 Click Use the following IP address.
3. Enter the IP address, Subnet mask and
Gateway from your service provider.
4. If needed, enter the preferred DNS Server
address and alternative address.
5. When done, click OK.
Windows
®
8.1
Conguring a dynamic IP/PPPoE network connection
To congure a dynamic IP/PPPoE network connection:
1. From the Start screen, click Desktop to launch the Desktop mode.
To Next Page
Loading...
Need help?
General
