4-26
Chapter 4: BIOS Setup
IRQ XX Reserved [No/ICU]
These fields indicate whether or not the displayed IRQ for each field is
being used by a legacy (non-PnP) ISA card. The setting [No/ICU] for an
IRQ field indicates that you are using the ISA Configuration Utility (ICU),
and that this particular IRQ is NOT required by a legacy ISA card. Set the
IRQ field to [Yes] if you install a legacy ISA card that requires a unique IRQ
and you are NOT using ICU. Configuration options: [No/ICU] [Yes]
4.4.3.1 PCI IRQ Resource Exclusion
Onboard LAN Boot ROM
This field allows you to enable or disable the onboard LAN Boot ROM.
Configuration options: [Disabled] [Enabled]
Onboard ATA device First [No]
This field allows you to select the onboard ATA first.
Configuration options: [No] [Yes]
To Next Page
Loading...
Need help?
General
