Notebook PC User Manual
A-5
Security Setting
To set the password:
1. On the Security screen, select Setup Administrator Password
or User Password.
2. Type in a password and press [Enter].
3. Re-type to confirm the password and press [Enter].
4. Password is then set.
To clear the password:
1. On the Security screen, select Setup Administrator Password
or User Password.
2. Enter the current password and press [Enter].
3. Leave the Create New Password field blank and press [Enter].
4. Leave the Confirm New Password field blank and press [Enter].
5. Password is then cleared.
: Select Screen
: Select Item
Enter: Select
+/—: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaul t s
F10: S a v e ESC: Exit
Version 2.01.1208. C o p y r i g h t (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 A m e r i c a n Megatrends, Inc.
Main Advanced BootMain Advanced B o o t Security Save & Exit
Password Descript i o n
If ONLY the Admi n i s t r a t o r ’s password is set,
then this only li m i t s a c c e ss to Setup and is
only asked for wh e n e n t e r i ng Setup.
If ONLY the user ’ s p a s s w o rd is set, then this
is a power on pas s w o r d a n d must be entered to
boot or enter Se t u p . I n S etup, the User will
have Administrato r r i g h t s .
Administrator Pa s s w o r d NOT INSTALLED
User Password St a t u s NOT INSTALLED
Setup administra t o r p a s s w ord
User Password
HDD Password St a t u s : NOT INSTALLED
Set Master Passw o r d
Set User Passwor d
I/O Interface Secur i t y
Set the system boot o r d e r .
You will be asked to enter the User Password whenever
you power on the Notebook PC (enter BIOS or OS). The
Administrator Password is only asked when you would like to
enter and configure the BIOS settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
