Asus P2B User Manual

ASUS P2B User’s Manual 61
VI. APPENDIX
The ASUS S370 CPU Card
The optional ASUS S370 CPU card allows Slot 1 motherboards to accept socket 370
processors. The ASUS S370 CPU card gives Slot 1 motherboard owners an inexpen-
sive way to upgrade their Pentium II computers using lower costing socket 370 pro-
cessors. Since socket 370 processors are based on the Pentium II design, the only
difference is the connector and the amount of internal cache within the processor.
The following picture shows the ASUS S370 CPU card with a plastic retainer at-
tached to the edge. The retainer is used to hold the ASUS S370 CPU card in place
using the motherboard’s Slot 1 retention mechanism.
Using the ASUS S370
The general procedure for using the ASUS S370 CPU card:
1. Check the voltage setting for your socket 370 processor using the jumpers on
the card if necessary. For current socket 370 processors, the default setting should
be used. See the reverse side of the ASUS S370 CPU card or the next page for
voltage settings.
2. Install the socket 370 processor. Installation of socket 370 processors is exactly
like socket 7 processors. Lift the brown lever to 90° to install the processor and
lower the brown lever to lock the processor.
3. Insert the ASUS S370 CPU card into Slot 1 on the motherboard. The two fins
on the sides of the ASUS S370 CPU card must catch on the retention mecha-
nism so that it locks in place.
4. Connect the socket 370 processor’s fan connector to the motherboard.
5. Make sure that no wires or objects come in contact with the fan.
Fin
Fin
Slot 1 Compatible Connector
ASUS S370 CPU Card Retainer
VI. APPENDIX
ASUS S370 CPU Card

Asus P2B Specifications

General

Matrix size	0.45 \
Number of colors	16.78 million colors
Native aspect ratio	-
Projection distance	0.5 - 3 m
Projection technology	DLP
Supported aspect ratios	4:3, 16:9, 16:10
Contrast ratio (typical)	3500:1
Screen size compatibility	20 - 120 \
Projector native resolution	WXGA (1280x800)
Throw ratio	1:1
Focal length range	- mm
Service life of light source	30000 h
Full HD	No
Analog signal format system	NTSC
Composite video in	0
USB connector type	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Card reader integrated	Yes
Compatible memory cards	MicroSD (TransFlash)
Internal storage capacity	2 GB
Noise level	32 dB
Preset modes	Cinema, Dynamic, Presentation, sRGB, Standard
Noise level (economic mode)	24 dB
RMS rated power	1.5 W
Audio formats supported	AAC, APE, FLAC, MP1, MP2, MP3, OGG, WAV, WMA
Image formats supported	BMP, JPEG XR, JPG, PNG
Video formats supported	3G2, 3GP, ASF, AVI, DAT, FLV, M4V, MKV, MOV, MP4, MPG, TS, VOB, WMV
Document formats supported	PDF
Placement	Ceiling, Tripod
Product type	Standard throw projector
Product color	White
Market positioning	Portable
Cable lock slot type	Kensington
Power source	AC/Battery
Battery capacity	2950 mAh
Battery life (max)	1.5 h
Power consumption (standby)	0.5 W
Power consumption (typical)	30 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 90 %
Cables included	VGA

Weight and Dimensions

Depth	130 mm
Width	142.5 mm
Height	34.6 mm
Weight	656 g
Package depth	179 mm
Package width	235 mm
Package height	113 mm
Package weight	1400 g