Asus P5QPL-AM - Motherboard - Micro ATX User Manual

1-28 Chapter 1: Product introduction
10. System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
• System power LED (2-pin PWRLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin HD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The IDE LED lights up or ashes when data is read from or written to
the HDD.
• ATX power button/soft-off button (2-pin PWRBTN)
This connector is for the system power button. Pressing the power button turns
the system on or puts the system in sleep or soft-off mode depending on the BIOS
settings. Pressing the power switch for more than four seconds while the system is ON
turns the system OFF.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.

Asus P5QPL-AM - Motherboard - Micro ATX Specifications

General

Form Factor	Micro ATX
Chipset	Intel G41
Socket	LGA 775
Memory Slots	2
Maximum Memory	8 GB
Memory Type	DDR2
USB Ports	8 x USB 2.0
Video Outputs	1 x VGA
Supported RAM Speed	800 MHz
Expansion Slots	1 x PCIe x16
Storage Interfaces	4 x SATA 3Gb/s
LAN	Realtek RTL8111C Gigabit LAN controller
Compatible Processors	Intel Core 2 Quad, Core 2 Duo, Celeron