4-18 Chapter 4: Software support
Due to OS limitation, Windows
®
XP may not recognize the USB oppy disk drive
when you install the RAID driver from a oppy disk during the OS installation.
To solve this issue, add the USB oppy disk drive’s Vendor ID (VID) and Product
ID (PID) to the oppy disk containing the RAID driver. Refer to the steps below:
1. Using another computer, plug the USB oppy disk drive, and insert the oppy
disk containing the RAID driver.
2. Right-click My Computer on
the Windows
®
desktop or start
menu, and then select Manage
from the pop-up window.
3. Select Device Manager. From the
Universal Serial Bus controllers,
right-click xxxxxx USB Floppy,
and then select Properties from
the pop-up window.
The name of the USB oppy
disk drive varies with different
vendors.
or
4. Click Details tab. The Vendor ID
(VID) and Product ID (PID) are
displayed.
5. Browse the contents of the RAID driver disk to locate the le txtsetup.oem.
6. Double-click the le. A window
appears, allowing you to select the
program for opening the oem le.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
