Chapter 2: BIOS information 2-15
The following three items appear only when you set both the Enhanced Intel SpeedStep
Technology and Turbo Mode items to [Enabled].
Long duration power limit [Auto]
Use <+>/<-> to adjust the value.
Long duration maintained [Auto]
Use <+>/<-> to adjust the value.
Short duration power limit [Auto]
Use <+>/<-> to adjust the value.
Power Limit Control [Disabled]
Allows you to enable or disable the power limit control function.
Conguration options: [Disabled] [Enabled]
The following two items appear only when you set the Power Limit Control item to
[Enabled].
Power Limit [Auto]
Use <+>/<-> to adjust the value.
Power Limit Time [10]
Use <+>/<-> to adjust the value.
Primary Plane Current Limit [Auto]
Use <+>/<-> to adjust the value.
Secondary Plane Current Limit [Auto]
Use <+>/<-> to adjust the value.
Some of the following items are adjusted by typing the desired values using the numeric
keypad and press <Enter>. You can also use the <+> and <-> keys to adjust the value. To
restore the default setting, type [auto] using the keyboard and press <Enter>.
2.4.7 CPU Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Voltage [Auto]
Allows you to set the Offset voltage. The values range from -0.635V to +0.635V with a
0.005V interval.
Refer to the CPU documentation before setting the CPU voltage. Setting a high voltage
may damage the CPU permanently, and setting a low voltage may make the system
unstable.
To Next Page
Loading...
Need help?
General
