1-2
Chapter 1: Product Introduction
1.3 Assembling the monitor base
1. Carefully put the front of the monitor face down on a clean table.
2. Attach the base to the arm. Beware to align the latch to the notch on
the base. (1)
3. The end of the arm will slightly protrude from the base. No need to
push it in. (2)
4. Screw the base to the arm tightly. (3)
2
1
3
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
To Next Page
Loading...
Need help?
General
