1.
Activates the QuickFit function.(Please refer to 1.3.3 QuickFit Function).•
2. button:
Selects a desired preset mode. •
Exits the OSD menu or goes back to the previous menu when the OSD •
menu is active.
Automatically adjusts the image to its optimized position, clock, and phase
•
by pressing this button for 2-4 seconds (for VGA mode only).
3.
Decreases values or moves your selection left/down. •
Volumn hotkey•
4. MENU button:
Turns on the OSD menu. Enacts the selected OSD menu item. •
5.
Increases values or moves your selection right/up. •
Brightness hotkey•
6. button:
Selects an available input source. •
Press (Input Select button) to display HDMI/DisplayPort signals after you
connect HDMI/DisplayPort cable with the monitor.