2-1ASUS VW202xR/VW202B LCD Monitor
2.1 Assembling the monitor base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Connect the base with the arm according to the below drawing. A click shows
that the base has been connected successfully.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2.2 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• You can adjust the monitor’s angle from -3º to 20º.
It is normal that the monitor slightly shakes while you adjust the the viewing
angle.
-3º~20º
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General
