EN 51
SETTING THE WATER HARDNESS
It is necessary to descale your appliance at regular intervals. This is the only way to prevent
damage.
Your appliance has a system that automatically displays when it needs descaling. It is preset to a
water hardness 3. Change the value if your water is softer.
Checking the water hardness
Information on the hardness of the water in your area can be obtained from the local water board.
Changing the water hardness
1
Turn the MODE SELECTOR to “OFF”
position.
2
Press LAMP and COOK TIME button
at the same time.
3
Turn the MULTI-FUNCTION
SELECTOR to select the desired water
hardness.
4
Automatically setting after 5 second.
The appliance is now programmed
to provide the descaling warning
when necessary, based on the
actual hardness of the water.
Display Type PPM
French deg.
(°df)
German deg.
(°dH)
H1 Soft Water 0 - 105 0 - 11 0 - 6
H2 Medium Soft water 125 - 230 12 - 23 7 - 13
H3
(Default)
Medium Hard Water 250 - 350 24 - 36 14 - 20
H4 Hard Water > 375 > 37 > 21
To Next Page
Loading...
Need help?
General
Weight and Dimensions
