EasyManuals Logo
Home>Atag>Oven>CX4595C

Atag CX4595C User Manual

Atag CX4595C
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
EN 26
Removing and cleaning the guide rails
Use conventional cleaning products to clean the guide rails.
1. Remove the screw using a screwdriver.
2. Remove the guide rails from the holes in the back wall.
Save the guide rail spacers carefully. Return the spacers after cleaning. This prevents
sparks being created during use.
Replacing the oven lamp
The lamp in this household appliance is only suitable for illumination of this appliance.
The lamp is not suitable for household room illumination.
The oven is fitted with a halogen lamp.
This product contains a light source of energy efficiency class (G).
The lamp is a consumer item and therefore not covered by warranty. Replace the
defective lamp with a lamp of the same type.
Disconnect the appliance from the power supply by removing the plug from the socket
or by switching off the circuit breaker in the fuse box.
Please note: the light bulb can be very hot! To prevent burns, use protection to remove
the light bulb.
1. Remove the four screws from the cover panel. Remove the cover panel and glass.
2. Remove the light bulb and install a new one.
3. Do not remove the seal from the cover panel. The seal should not become lose from the
cover panel. The seal must fit perfectly in the oven wall recess.
MAINTENANCE
871572_en_naslovnica_drug_papir.indd EN26871572_en_naslovnica_drug_papir.indd EN26 2. 12. 2021 08:45:122. 12. 2021 08:45:12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atag CX4595C and is the answer not in the manual?

Atag CX4595C Specifications

General IconGeneral
BrandAtag
ModelCX4595C
CategoryOven
LanguageEnglish

Related product manuals