36 6996 0223 70
Maintenance
5.1 Preventive maintenance schedule
Before carrying out any maintenance, repair work or adjustment,
Stop the pump, close the isolation valve and wait for 3 minutes.
Press the emergency stop button and switch off the voltage.
Depressurize the pump by venting the process side of the pump, if it is safe to do so.
Open and lock the isolating switch.
Lock the air inlet valve during maintenance or repair.
The operator must apply all relevant safety precautions.
Warranty - Product Liability
Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by
Warranty or Product Liability.
Service kits
For overhauling and for preventive maintenance, service kits are available. Service kits comprise all parts required
for servicing the component and offer the benefits of genuine Atlas Copco parts while keeping the maintenance
budget low.
Consult the Spare Parts List for part numbers.
Service contracts
Atlas Copco offers several types of service contracts, relieving you of all preventive maintenance work. Consult your
Atlas Copco Customer Centre.
General
When servicing, replace all removed O-rings and washers.
Intervals
The local Atlas Copco Customer Centre may overrule the maintenance schedule, especially the service intervals,
depending on the environmental and working conditions of the pump
The longer interval checks must also include the shorter interval checks.
To Next Page
Loading...
Need help?
General
