Atlas Copco GA18 User Manual

2920 1461 03
17
User manual
2.2 Pictographs
10 Alarm
11 Automatic operation
12 Voltage on
2.3 Function keys
The keys are used:
- To manually load/unload the compressor
- To call up or to program settings
- To reset a motor overload, shut-down or service message,
or an emergency stop
- To have access to all data collected by the regulator
The functions of the keys vary depending on the displayed menu.
The actual function is abbreviated and indicated on the bottom
line of the display just above the relevant key. The most
common abbreviations are listed below.
Abbre- Desig- Function
viation nation
Add Add To add compressor start/stop
commands (day/hour)
Back Back To return to a previously shown
option or menu
Canc Cancel To cancel a programmed setting
when programming parameters
Del Delete To delete compressor start/stop
commands
Help Help To find the Atlas Copco internet
address
Lim Limits To show limits for a programmable
setting
Load Load To load the compressor manually
Main Main To return from a menu to the main
screen (Fig. 3.2)
Menu Menu Starting from the main screen (Fig.
3.2): to have access to submenus
Menu Menu Starting from a submenu, to return
to the previous menu
Mod Modify To modify programmable settings
Abbre- Desig- Function
viation nation
Prog Program To program modified settings
Rset Reset To reset a timer or message
Rtrn Return To return to a previously shown
menu
Unld Unload To unload the compressor
manually
Xtra Exta To find the module configuration
of the regulator

Atlas Copco GA18 Specifications

General

Brand	Atlas Copco
Model	GA18
Category	Air Compressor
Language	English