5.2 Service kits
Atlas
Copco has a complete range of service kits available. Service kits comprise all parts needed for servicing
components and offer the benefits of using genuine Atlas Copco parts while keeping the maintenance budget
low.
Service kits
1 Activated carbon filters
2 Oleophilic filters
3 Diffuser
4 Mufflers
For each type of OSC, three service kits are available:
•
Service kit A comprises the material to change the oleophilic filter(s) once. It is a kit for the first service
after installation when the condensate is in normal condition. After this, service kit B can be used.
• Service kit B comprises the material to change the oleophilic filter(s) twice and the activated carbon filter(s)
once. This kit is also intended for use when the condensate is in normal condition. The lifetime of the
carbon filter is twice as long as that of the oleophilic filter.
• Service kit D comprises the material to change the oleophilic filter(s) as well as the activated carbon
filter(s) once. This kit should be used when the condensate contains a lot of oil, so that all the filters will
be saturated at the same time.
Part Number
Service kit A 2901 1400 00
Service kit B 2901 1400 01
Service kit D 2901 1575 00
Instruction book
AIF999999 17
To Next Page
Loading...
Need help?
General
