blown upwards. If the direction is wrong, stop the compressor immediately and reverse two incoming
electric lines.
(1) Rotation control check
(2) Electropneumatic controlled compressors
(3) Compressors with Elektronikon controller
A compressor equipped with a phase sequence relay will not start if the phase sequence is wrong. In
that case, reverse two incoming electric lines to solve the issue.
4.2 Starting
Control panel
Gp Pressure gauge Q1/H1 On/off switch with lamp
P1 Hour meter Gd Dew point gauge
Procedure
1. Close the manual condensate drain valve(s) if present.
2. Open the air outlet valve (AV).
Instruction book
24 2920 7110 11
To Next Page
Loading...
Need help?
General
