Change this command to the new command (in the example above “17:00 Pressure Band 2”)
Press the arrow down key and add the last command of the list (in the example above “18:00 Stop
Compressor” and press the key “Program”.
Deleting a command
• Starting from the Main screen, press the key “Menu” (F1), press the arrow down key until the option
“Modify Parameters” is followed by a horizontal arrow.
• Activate the menu by pressing the tabulator key (2).
• Use the scroll keys (1) to scroll until the option “Clock Function” is followed by a horizontal arrow.
Press the tabulator key, following screen appears:
“Clock Function”
“Not Activated”
.
“Menu” “Modify” “Delete”
F1 F2 F3
Deleting all commands
• Press the key “Delete” in the screen above. A question to confirm the deleting operation will appear.
Deleting all commands of a specific day
• Scroll through the display until the desired day is followed by a horizontal arrow. Press the key
“Delete”, a question to confirm the deleting operation will appear.
Deleting a specific command
• Scroll through the display until the command to be deleted is followed by a horizontal arrow. Press
the key “Delete”, a question to confirm the deleting operation will appear.
5.19 Modifying configuration settings
Control panel
Instruction book
2920 1815 04 99
To Next Page
Loading...
Need help?
General
