To Next Page

To Previous Page

Analog Fast Track Guide 1. Quick Start

Version 4.8 7 March 2006

1 Quick Start

This guide provides you with information on how to install the MediaPack for the first time. Prior

knowledge of IP networks is preferred.

Refer to the configuration procedures, outlined in Figure 1-1, for information on how to install,

initialize, configure the device and make calls. For detailed information on how to fully configure

the gateway refer to the MediaPack User’s Manuals.

Figure 1-1: Required Steps to Install the MediaPack

Table of Contents5
Quick Start9
Figure 1-1: Required Steps to Install the Mediapack9
Installing the Mediapack10
Installing the MP-11X10
Unpacking10
Package Contents10
19-Inch Rack Installation Package11
Mounting the MP-11X11
Figure 2-1: 19-Inch Rack Shelf11
Figure 2-2: View of the MP-11X Base11
Table 2-1: View of the MP-11X Base11
Mounting the MP-11X on a Desktop12
Mounting the MP-11X on a Wall12
Installing the MP-11X in a 19-Inch Rack12
Figure 2-3: MP-11X Rack Mount12
Table 2-2: MP-11X Rack Mount12
Cabling the MP-11X13
Figure 2-4: MP-118 Rear Panel Connectors13
Table 2-3: MP-11X Rear Panel Component Descriptions13
Table 2-4: MP-11X Cables and Cabling Procedure13
Figure 2-5: RJ-45 Ethernet Connector Pinout14
Figure 2-6: RJ-11 Phone Connector Pinout14
Figure 2-7: PS/2 Pinout14
Figure 2-8: PS/2 to DB-9 Adaptor Pinout14
Configuring the Mediapack15
Assigning the Mediapack IP Address15
Assigning an IP Address Using HTTP15
Table 3-1: Mediapack Default Networking Parameters15
Assigning an IP Address Using Bootp16
Assigning an IP Address Using the Voice Menu Guidance17
Figure 3-1: Client Configuration Screen with Blank Parameters17
Assigning an IP Address Using the CLI18
Access the CLI18
Assign an IP Address19
Restoring Networking Parameters to Their Initial State19
Accessing the Embedded Web Server20
Basic Control Protocol Parameters20
Figure 3-2: Embedded Web Server Login Screen20
Configuring Basic MGCP Parameters21
Figure 3-3: Mediapack MGCP Quick Setup Screen21
Configuring Basic H.323 Parameters22
Figure 3-4: Mediapack H.323 Quick Setup Screen22
Configuring Basic SIP Parameters24
Figure 3-5: Mediapack SIP Quick Setup Screen24
Example of Connecting Two MP-118 Devices26
Figure 3-6: Example of Connecting Two MP-118 Devices26
Changing the Mediapack Username and Password27
Figure 4-1: Web User Accounts Screen27
Restoring and Backing up the Mediapack Configuration28
Figure 5-1: Configuration File Screen28
Monitoring the Mediapack29
Monitoring the Mediapack Front Panel Leds29
Table 6-1: Definition of MP-11X Front Panel LED Indicators29
Monitoring the Mediapack Channels30
Figure 6-1: Mediapack/Fxs Channel Status Screen30
Table 6-3: Channel Status Color Indicators30
Upgrading the Mediapack31
Software Upgrade Wizard31
Figure 7-1: Start Software Upgrade Screen31
Figure 7-2: Load a Cmp File Screen32
Figure 7-3: Cmp File Successfully Loaded into the Device Notification32
Figure 7-4: Load an Ini File Screen33
Figure 7-5: Load a CPT File Screen34
Figure 7-6: FINISH Screen34
Figure 7-7: 'End Process' Screen35
Updating the Auxiliary Files36
Table 7-1: Ini and Auxiliary Files Descriptions36
Figure 7-8: Auxiliary Files Screen (MGCP Gateways)37
Regulatory Information38
MP-11X FXS38

Brand	AudioCodes
Model	MediaPack MP-108
Category	Gateway
Language	English

AudioCodes MediaPack MP-108 Fast Track Guide

Table of Contents

Other manuals for AudioCodes MediaPack MP-108

Questions and Answers:

AudioCodes MediaPack MP-108 Specifications

Related product manuals