AudioCodes MP-100 Quick Start Installation Guide

Page 18 of 19
AudioCodes™ MP-104 Gateway Quick Start Installation Guide
August 2004
8. Software Update: Allows you to update configuration files using TFTP or HyperText
Transfer Protocol (HTTP).
• Software Upgrade Wizard: Allows you to download the configuration files. This
Wizard is helpful when upgrading to version newer than v4.4. To download the
files, click Start Software Upgrade and follow the instructions on the Wizard.
• Load Auxiliary Files: Allows you to upload the INI, Coefficient, and Call
Progress Tone files. To upload the files, click Browse to select the appropriate
file(s), then click Send File.
NOTE: Currently the Voice Prompt and Pre Recorded Tones files are not used on
Axxess systems.
9. Save Configuration: Click Save Configuration to save configuration to the system.
10. Reset: Check Burn and click Reset to restart the system.

AudioCodes MP-100 Specifications

General

Brand	AudioCodes
Model	MP-100
Category	Gateway
Language	English