3. Heed all warnings on the product and in this guide.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture.
6. Clean only with a dry cloth and as directed by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves or other apparatus that produce
heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or
third prong are provided for your safety.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Use only attachments or accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the cart/appara-tus combination to avoid injury from tip-over
13. Unplug this apparatus during lightning storms or when unused for long periods of time to prevent damage to this
product.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
Quick Setup
1. Connect the speaker wire from the HD6 left (powered) speaker to the right (passive) speaker.
2. Connect the wireless antenna to the HD6 rear panel.
3. Connect the power cable to the HD6 rear panel and plug the other end into an AC power outlet.
Wireless connection
1. Turn on the HD6 power switch located on the rear panel. HD6 will automatically go into Bluetooth “pair
mode”and the Pair button on the HD6 rear panel should start flashing.
2. On your device (phone, tablet, laptop, etc), turn on Bluetooth and go to Bluetooth preferences.
3. Select”Audioengine HD6″to pair and conned.The Pair indicator on the HD6 rear panel should be solid. Play
your music and adjust volume levels on HD6 and your device.
4. To add additional devices put HD6 back into pair mode by discon-necting HD6 from your device or by pressing
and holding the Pair button on the HD6 rear panel until the pair indicator starts flashing. HD6 can wirelessly
connect to only one device at a time, however it will remember up to six different devices.
Wired connection
1. Connect one of the included audio cables to your music player (phone, tablet, computer, TV, etc) and the other
end to an input on the HD6 rear panel.
2. Play your music and adjust the volume on the speakers and your device to the desired listening levels.
Inputs and volume settings
To Next Page
Loading...
Need help?
General
