AUX DC Inverter Free Match 50HZ R32
97
Feeing button: Press this button for setting the feeling function. The LCD shows the actual
room temperature when the function is set and it shows the setting temperature when the function
is cancelled. The function is invalid in the fan mode.
TIMER/CLOCK button:
Clock Setting: Normally display the clock set currently (display 12:00 for the first electrifying
or resetting). When press the button for 5 seconds, the time display zone will flicker, then press
【+】 and 【-】 button to adjust hour that uses 12-hour clock including “A.M.” and “P.M.” time;
press the button again to complete the setting.
Timer setting: Press the button to set TIMER ON/OFF, press the button then “ON” will flicker
on the display screen. then press【+】 and 【-】 button to adjust timing time; Press the button
again to complete the setting. The “OFF” setting is the same methods.
Remark: When setting functions such as mode, temperature, fan speed, display
screen displays all presetting parameters and remains constant; after reaching presetting
time, air conditioner will automatically start as per presetting state.
After setting timing ON and OFF function, pressing button of 【Timer/Clock】can
cancel timing setting.
SLEEP button:
1. Press the button to the sleeping indicator light of indoor unit flashes on;
2. In sleeping mode, the cooling operation enables the set temperature to increase 1℃ after 1
hour and another 1℃ automatically after 1hour.
3. In sleeping mode, the heating operation enables the set temperature to drop 2℃ after 1 hour
and another 2℃ automatically after 1hour.
The air conditioner will cancel sleeping mode automatically after running in this mode for 7
hours.
4. Remark:
Press the mode or ON/OFF button, the remote controller will cancel sleeping mode.
To Next Page
Loading...
Need help?
General
