Axon Body 3 Camera User Manual
Axon Enterprise, Inc. Page 12 of 44
Select button – Used to mute audio recording, to add markers to the video during
recording, and activate display backlight.
Volume button – Used to decreases speaker volume and enter or exit stealth mode.
Microphones – For recording audio.
Event button – Used to start and stop recording. Double-press to start recording. Press and
hold for 3 seconds to stop recording and return to Ready (buffering) mode.
Triad LED – In the field, can show the camera’s operating mode. In an Axon Dock, displays
camera status and battery capacity.
In the field, the Triad LED on the front of the camera can be configured to display the
camera’s operating mode.
Operating Mode Triad LED
Ready (Buffering) Blinking green
Recording Blinking red
In the Axon Dock, the Triad LED on the front of the camera shows the device status and
battery capacity. See the camera display for additional information.
Device Status Triad LED
Battery is fully charged (> 98%) Solid green
Battery capacity is at mid-range (33% to 97%) Solid yellow
Battery capacity is at low-range (< 33%) Solid red
Uploading data, downloading data, or applying
device settings
Spinning yellow (cycling yellow on each Triad
LED)
Applying a firmware update Spinning white (cycling white on each Triad LED)
Possible network error. Refer to Troubleshooting
section of the Axon Body 3 User Manual or go to
help.axon.com.
Blinking red and green
Device error. Refer to device page in Axon
Evidence.
Blinking red
Program button – Used in conjunction with the Event button to activate pairing.
To Next Page
Loading...
Need help?
General
