Axon Body 3 User Manual

Axon Body 3 Camera User Manual
Axon Enterprise, Inc. Page 18 of 44
To enter and exit mute mode:
1. Press and hold the Select button for 3 seconds to mute the audio capture. The
microphone off icon is shown on the camera display and the Operation LED will blink
blue while the camera is muted.
2. Press and hold the Select button another 3 seconds to re-enable the audio recording.
Adding Markers while Recording
The Select button can be used to add a marker while recording video. The marker is shown
when the video is replayed in Axon Evidence and documented in the audit trail. Markers are
useful for indicating an important event that you want to easily find when replaying the
video.
To add a marker to a video while you are recording:
• Press and release the Select button within 1 second. The camera will vibrate once.
Lighting the Camera Display
At night and in low-light situations, you can use the Select button to backlight the Camera
Display. To backlight the display:
• Double-press the Select button. The camera display is backlit for 5 seconds.
Battery Status
The battery capacity for your Axon Body 3 camera is shown in the camera display.
Sleep Mode
Sleep Mode puts the camera in an idle state that disables recording and buffering. While in
this state, an automatic activation, if enabled at your agency, will not initiate camera
recording.
Note: Sleep Mode requires Axon Body 3 camera Operating System v1.10 or later. The ability
to use Sleep Mode is enabled by agency Axon Evidence administrators And may not be
enabled at your agency.

Axon Body 3 Specifications

General

Brand	Axon
Model	Body 3
Category	Digital Camera
Language	English