CP-UM-XXXXE
XXXX(形番)
XXXXXXX(製品名称)
User's Manual
E1
Thank you for purchasing the AUD10C1000. This
manual contains information for ensuring correct
use of the AUD10C1000. This manual should be
read by any personnel who are responsible for the
maintenance of devices that are installed with the
tube unit. Keep this manual in an easily accessible
place with the following related manuals:
AUD300C1000 Advanced Ultraviolet Flame Detector
CP-SP-1141E
AUR300C Advanced Ultraviolet Burner Controller
CP-SP-1142E
AUR350C Advanced Ultraviolet Burner Controller
CP-SP-1175E
AUR450C Dynamic Self-Checking Burner Controller
CP-SP-1264E
Please read the "Terms and Conditions" from the
following URL before ordering or use:
http://www.azbil.com/products/bi/order.html
NOTICE
Be sure that the user receives this manual before the
product is used.
Copying or duplicating this user’s manual in part or in
whole is forbidden. The information and specifications in
this manual are subject to change without notice.
Considerable effort has been made to ensure that this
manual is free from inaccuracies and omissions. If you
should find an error or omission, please contact the azbil
Group.
In no event is Azbil Corporation liable to anyone for any
indirect, special or consequential damages as a result of
using this product.
© 2005-2012 Azbil Corporation All Rights Reserved.
SAFETY PRECAUTIONS
Safety precautions are for ensuring safe and correct
use of this product, and for preventing injury to the
operator and other people or damage to property. You
must observe these safety precautions. Also, be sure to
read and understand the contents of this user's manual.
WARNING
Warnings are indicated when mishandling this
product might result in death or serious injury to
the user.
CAUTION
Cautions are indicated when mishandling this
product might result in minor injury to the user, or
only physical damage to this product.
WARNING
Do not touch this unit or the F-terminal or G-terminal of •
the AUR immediately after the power to the AUR has
been turned OFF. The F-terminal or G-terminal are still
electrically alive within 1 min after the power has been
turned OFF, causing an electric shock hazard.
CAUTION
When transporting combustion equipment, uninstall •
the AUD300C Advanced Ultraviolet Flame Detector
and the tube unit, and ship them in the same
packaging that they were in when they were received.
Failure to do so could result in faulty operation
incurred from shock or vibration during shipping.
The service life of the AUD10C1000 tube unit is a •
maximum of 3 years. To ensure operational safety,
replace the tube unit with a new one within this
service life.
1. Overview
The AUD10C1000 is a photoelectric tube that detects the
ultraviolet radiation emitted by a flame. It is used in combination
with the AUD300C Advanced Ultraviolet Flame Detector.
2. Names of parts
AUD300C construc ● tion
Mounting nut
Flange unit
Lead wires
Cover mounting screws (4)
81446925-002 Cover
AUD50A1000 shutter unit
AUD10C1000 tube unit
AUD10C1000 tube unit ●
Label
Thermo-label
Ultraviolet ray
receiving part
Housing
O-ring
Tube unit retaining screws (2)
CP-UM-5296JE
AUD10C1000 Tube Unit
for the AUD300/500
User's Manual
To Next Page
Loading...
Need help?
General
