1
Specifications/Instructions
AB-7329
© 2016–2020 Azbil Corporation. All Rights Reserved.
Advanced Remote I/O Module
Overview
This product (model RJ-11__W____) is an I/O module
dedicated for Advanced Controller (models
WJ-1101W0000 and WJ-1103W0000), Advanced
Controller for Chiller Units (model WJ-1102Q), and
Advanced Controller for Pump Units (model WJ-1102P).
Up to 20 units of this products can be connected in any
combination to Advanced Controller, Advanced
Controller for Chiller Units, or Advanced Controller for
Pump Units.
Features
• Flexible I/O conguration
This product has I/Os, DI, DI + DO, and UIO
(universal I/O), so it allows connections with various
I/Os.
Up to 20 units can be connected in any combination.
• Remote installation
This product can be installed close to the facilities in
the eld, away from the Advanced Controller,
Advanced Controller for Chiller Units, or Advanced
Controller for Pump Units.
• Redundancy by ring connection
An Ethernet ring connection allows a fail-safe
network against disconnection.
• Visualized I/O statuses
This product has LEDs to indicate the statuses of the
feedback input from facility equipment and the ON/
OFF output to facility equipment.
To Next Page
Need help?
General
