1. Safety & environmental Information
1. SAFETY & ENVIRONMENTAL INFORMATION
About this document
Read this document attentively. It contains important information to prevent personal injury while installing and using the DP2K-C s e-
ries projector. F urthermore, it includes several cautions to prevent dam age to the DP 2K-C series projector. Ensure that you under -
stand and follow all safety guidelines, safety instructions and warnings mentioned in this c hapter before installing th e D P2K -C ser ies
projector.
Clarification of the term “DP2K-C series” used in this document
When referring in this document to the term “DP2K-C series” means that the content is applicable for following Barco products:
•DP2K-11Cx
• DP2K-12C
• DP2K-12C x
• DP2K-15C
• DP2K-15C x
• DP2K-18C x
• DP2K-20C
• DP2K-20C x
Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guar-
antee. O bserving the specification m entioned in this chapter is critical for projector performance. Neglecting
this can result in loss of warranty.
Overview
• General c onsiderations
• Important safety instructions
• Turkey RoHS complianc e
• Disposal information
• Contact information
• Production address
• Download Product Manual
1.1 General considerations
General safety instructions
• Before operating this equipm ent please read this manual thoroughly and retain it for future reference.
• Installation and preliminary a djustments should b e performed by qualified B arco pers onnel or by authorized B arco service deal-
ers.
• All warnings on the pr ojector and in the documentation manuals s hould be adhered to.
• All instructions for operating and use of this equipment must be follo
wed precisely.
• All local installation cod es should be adhered to.
Notice on safety
This equipment is built in accordance with the requirements o f the international safety standards IEC60950-1, EN60950-1,
UL60950-1 and CAN/CSA C22.2 No.60950-1, which are the safety standards of information technology equipmen t including
electrical bus iness equipment. Thes e safety standards impos e important requirements on the use of safety critical components,
materials and insulation, in order to protect the user or operator against risk of electric s hock and energy hazard and having access
to live parts. Safety standards also impose limits to the internal and external tem perature rises, radiation levels, mechanical stability
and strength, enclosure construction and protection against the risk of fire. Simulated single fault condition testing ensures the
safety of the equipm ent to the user even whe n the e quipment’s norm al operation fails.
Users definition
Throughout this ma nual, the term s SERVICE PERS O NNEL and T RA INED PROJECTIONIST refers to p ersons ha ving appropriate
technical training and ex perience necessary to be knowledgeable of potential hazards to which they are exposed (including, but not
limited to HIGH VOLTAGE ELECTRIC and E LECTRONIC CIRCUITRY and HIGH BRIGHTNESS PROJECTORS) in performing a
task, and of measures to minimize the potential risk to themselves or other persons. The term USER and O PE RATOR refers to
any person other than SERVICE PERS ON NEL or TRAINED P ROJECT IONISTS , AUTHO RIZED to op erate professional projection
system s.
R59770352 DP2K-C SERIES 22/03/2017
1
To Next Page
Loading...
Need help?
General
