R5906113 /09 UDX 85
8.6 Mounting the left cover
Required tools
7 mm flat screw driver
How to mount
1. Place the cover on its place, with the grating of the filter facing the backside of the projector.
Caution: Do NOT try to fasten the cover while holding it upside down (with the filter facing the front
side). This WILL damage the projector.
Image 8-7: Mount left cover (light processor side)
2. Fasten the four captive screws (reference 1).
Projector covers
To Next Page
Loading...
Need help?
General
