PAGE 113 / 119
USER MANUAL NUMBER/VERSION: MU-001/12.0 APPLICATION DATE: 10/10/19
C/ Illa de Buda, 2 (P.I. Sud-Oest)
08192 Sant Quirze del Vallès [Barcelona - Spain]
T +34 935442003
www.batec-mobility.com info@batec-mobility.com
Checking brakes:
Make sure that when you squeeze the brake levers, both have sufficient contact with the
disc for effective braking.
Greasing cables and chains:
Apply a drop of grease or light coat of Teflon spray to the cable connecting levers and to
chains, after removing the old grease. After applying, remove any excess grease.
Greasing the transmission mechanism:
Apply a drop of grease or light coat of Teflon spray to the transmission mechanism, after
removing the old grease. After applying, remove any excess grease.
Having Batec serviced by an authorised distributor:
We recommend you make sure your Batec is in top shape with a full service by trained
professionals.
Replacing tyres and inner tubes:
Before installing a new inner tube, check the base of the rim and inside wall of the tyre to
remove any foreign bodies and, if necessary, clean well. Check the conditions of the rim
tape, particularly around the valve hole. Only strong, properly placed rim tape can provide
long-term protection against damage to the inner tube caused by burrs and sharp spoke
heads.
To Next Page
Loading...
Need help?
General
