PAGE 98 / 119
USER MANUAL NUMBER/VERSION: MU-001/12.0 APPLICATION DATE: 10/10/19
C/ Illa de Buda, 2 (P.I. Sud-Oest)
08192 Sant Quirze del Vallès [Barcelona - Spain]
T +34 935442003
www.batec-mobility.com info@batec-mobility.com
• The Batec battery is charged with the 3-pin XLR port on the side of the
battery.
• Only charge the battery with the original Batec Mobility charger
provided with your Batec.
Never, under any circumstances, use chargers from other
manufacturers or a charger from another BATEC, as the
specifications for each Batec series are different.
• Recharge time for the Batec Mobility battery is 3 hours. Both the
charger and the battery management system cut the power when the
battery is fully charged.
• Charging the battery: To charge the battery, the key must be in the
OFF or OPEN position. You can charge the battery whether or not it is
1. Charging port
2. Connect to charging port
3. Green light, charger plugged in
Orange light, charging
Green light, fully charged
To Next Page
Need help?
General
