Safety instructions
General information
• Only use in dry rooms.
• Only use unmodified original parts from the control unit manufac-
turer.
• Keep children away from control units.
• Observe all pertinent country-specific regulations.
Caution
• Risk of injury due to electric shock.
• The limits given in the technical data must not be ex-
ceeded.
• Connections to the 230V mains must always be estab-
lished by an authorised specialist.
• Disconnect the connecting cable from the power supply
prior to assembly.
• Always comply with the regulations of local energy sup-
ply companies as well as the VDE 100 provisions for wet
and damp rooms during installation.
• Keep people out of the system’s range of travel.
• If the system is controlled by one or more devices, the
system’s range of travel must always be visible during
operation.
• When connecting the control cables (protected extra-
low voltages), only use cables with sufficient electric
strength.
4
To Next Page
Loading...
Need help?
General
