DE
GB
FR
NL
Retrotting and operation of radio control system
S55
J1
S55
Function
1-channel radio remote control
Caution
When using a radio control system the person controlling the door must have a clear view of the door and
its surrounding area during door movement and must not be in a dangerous position (see EN12453).
In setting mode and in the event of a malfunction, the radio receiver board must be removed from the PCB
slot J1.
Programming the Hand-held Transmitter Code
Channel 1
Note
You can combine all hand-held transmitters with all receivers.
Example:
You have an application with 4 doors each of which is controlled by an S55 with 1-channel radio control
receiver. If you use 4-channel hand-held transmitters and assign each button to one of the 4 receivers,
you can control all 4 doors independently of one another with just one hand-held transmitter.
If you require more than 60 transmitter codes, please contact your dealer. Here too we can offer custom-
ised solutions.
Deleting All the Transmitter Codes Programmed
Channel 1