5 Installation BECKHOFF Drive Technology
30 Version : 4.5 AX5000
5 Installation
WARNING
Caution – Risk of injury!
• The servo drives may only be installed by trained, qualified personnel.
The qualified personnel must know and comply with the national accident
prevention regulations.
• Safety boots must be worn.
Caution - Risk of injury through electric shock!
De-energise all electrical components (servo drive, control cabinet, etc.)
before commencing the installation or deinstallation.
5.1 Mechanical installation
Attention
Destruction of the servo drive!
• Always install the servo drive vertically.
• Provide adequate ventilation for the servo drive. The permissible ambient
conditions are specified in the "Technical data" section.
• It is essential to adhere to the required distances (see diagrams below).
5.1.1 Installation in the control
cabinet
Caution - Risk of injury through electric shock!
The mounting plate must be earthed according to the statutory regulations.
If the ground connection of the AX5000 is not done as specified it is
possible to get trouble with some EMC issues.
To Next Page
Loading...
Need help?
General
