Behringer COMPRESSOR/LIMITER CL9 Instructions

COMPRESSOR/LIMITER CL9
Classic Compressor/Limiter Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER COMPRESSOR/LIMITER CL9.
This ultimate eects pedal is specically designed to achieve super-smooth compression and
extended sustain. Thanks to its high-performance features you can compress loud and boost low
signals without degrading the original sound.
A compressor limits the dynamic range of a signal. This means that signal peaks will be attenuated
and the level dierences between loudest and softest playing are reduced. This results in a more
powerful tone.
1. Controls
(1) The ATTACK TIME control determines how fast the compressor responds to input signal peaks.
(2) The LEVEL control adjusts the output level.
(3) The SUSTAIN control determines the amount of compression.
(4) The ON/BATT LED illuminates when the eect is activated. It also serves as a
battery level indicator.
(5) Use the footswitch to activate/deactivate the eect.
(6) Use this ¼" TS IN connector to plug in the instrument cable.
(7) The ¼" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
(2)
(7)
(3)
(5)
(6)
(1)
(4)

Behringer COMPRESSOR/LIMITER CL9 Specifications

Input Specifications

input connector type	1/4" TS
input impedance	500 kΩ

Output Specifications

output connector type	1/4" TS
output impedance	1 kΩ

Power

power supply voltage	9 V
power supply current	100 mA
battery type	9 V type 6LR61
power consumption	30 mA

Dimensions and Weight

height	54 mm
width	70 mm
depth	123 mm
weight	0.33 kg