Behringer CS400 User Manual

2 COMPRESSOR/SUSTAINER CS400
The BATTERY COMPARTMENT is located underneath the pedal cover.
To install or replace the 9 V battery, press the hinges with a ballpen and
remove the pedal cover. Be careful not to scratch the unit.
◊ ◊ The CS400 has no on/o switch. As soon as you insert the
jack into the in connector, the CS400 begins running. When
not using the CS400, remove the jack from the in connector.
This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualied servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.
3. Warranty
For the applicable warranty terms and conditions and additional
information regarding Music Tribe’s Limited Warranty, please see
complete details online at musictribe.com/warranty.

Behringer CS400 Specifications

Power

battery type	9 V type 6LR61
power consumption	30 mA
power supply	9 V, 100 mA regulated

Ports & Interfaces

input connector	1/4" TS
input impedance	500 kΩ
output connector	1/4" TS

Weight and Dimensions

height	54 mm
width	70 mm
depth	123 mm
weight	0.33 kg