If the steam pressure gauge shows a number greater than 0, turn
the tap or lever on, to dispense hot water. Keep hands away from
tip and pipe to avoid scalding as you can easily burn yourself or
others.
When you have dispensed enough water turn the tap clockwise
or flick the lever to the center position to stop the hot water.
If the steam pressure gauge needle shows a number around
1-1.5 bar in pressure, turn the tap or lever on, and steam will exit.
Keep hands away from tip and pipe to avoid scalding as you can
easily burn yourself or others. ONLY GRAB THE STEAM WAND BY
THE RUBBER TAB. Refer to gure 1.
Whenyouhavenishedwiththesteamturnthetapclockwiseor
flick the lever to the center position to stop the steam flow.
4.3.1 Hot Water (Inizio V & R) turn tap or leva
4.4.1 Generating (Inizio V & R) turn tap or leva
gure 1.
9