Owner’s tool kit
The bike is provided with a tool bag.
The owner’s tool kit is located under the pas-
senger seat.
The service information included in this ma-
nual and the tools provided in the owner’s
tool kit are intended to assist you in the per-
formance of preventive maintenance and mi-
nor repairs. However, additional tools such as
a torque wrench may be necessary to perform
certain maintenance work correctly.
TIP
If you do not have the tools or experience re-
quired for a particular job, have a Benelli dea-
ler perform it for you.
A list of workshops is available on our website
www.benelli.com.
TIP
• The annual checks must be performed
every year, except if a kilometer-based
maintenance, or for the UK, a milea-
ge-based maintenance, is performed
instead.
• At 13.000 km (8.078 mi), repeat main-
tenance services as begun at 7.000 km
(4.350 mi).
• Items marked with an asterisk should
be performed by a Benelli dealer as they
require special tools, data and technical
skills.
• The use of non-original replacement
parts may accelerate motorbike wear
and tear and cut shorts its life. Failure to
perform recommended operations or
the use of non-original parts may render
the legal warranty null and void.
• The replacement and/or topping up of
lubricants and luids, must only be carri-
ed out with the recommended products.
TIP
AIR FILTER
The air ilter needs to be replaced more often
if the vehicle is used in particularly damp or
dusty environments.
HYDRAULIC BRAKE MAINTENANCE
• Check brake luid levels on a regular basis
and top up as necessary.
• Every two years replace the internal
components of the brake master cylin-
ders and calipers, and change the brake
uid.
• Replace the brake hoses every four years
and if cracked or damaged.
The following section shows all of the mainte-
nance operations
KEY
I
Inspection and adjustment,
cleaning, lubrication or
replacement, as needed
R Replacement
T
Tighten to the
torque listed
Dealer
To Next Page
Loading...
Need help?
General
