32
Flight mode
When boarding an airplane or entering an area where
it is prohibited to radiate radio signals, e.g., during
ight, ight mode must be activated. It is only
necessary to activate ight mode on one hearing aid.
When ight mode is activated, only Bluetooth
®
is
turned off. The hearing aid will still be working.
To activate and
deactivate ight mode
press and hold the
push button (lower
part) for 7 seconds.
LED ight mode deactivated: The LED will turn
steady red for a few seconds, until the hearing aid
returns to its normal operating mode.
Pressing the button on one hearing aid will activate
ight mode on both hearing aids.
See overview “Sound and LED indications”.
Beep: The hearing aid plays
4 descending tones followed
by 4 tones to indicate that
ight mode is activated or
deactivated.
LED ight mode activated:
A long red blink followed by
green, red, red. The LED will
blink green, red, red a few
times. This conrms that
ight mode is activated.
To Next Page
Loading...
Need help?
General
