Bernal Sensor-Line S 401 User Manual

S 401 GB - 10 - 03-06
bracket
xtend the door measurements on the lintel,
so that the provid 16) is
exactly in the middle of the door and above the
required highest door position.
Us
lin
Attention:
Then attach the lintel bracket (Fig. 17) to the
lintel. (depending on the installation situation
e provided fastening screws have to be re-
laced by others).
hen fasten the rail to the lintel bracket with a
oach bolt and a lock nut (Fig. 18).
Mounting the lintel
E
ed head bracket (Fig.
e a pen and mark the bracket holes on the
tel and drill the required holes (Fig. 16).
When drilling, cover the drive!
th
p
Attaching the rail to the head bracket
T
c
Fig. 16
Fig. 17
Fig. 18

Bernal Sensor-Line S 401 Specifications

General

Brand	Bernal
Model	Sensor-Line S 401
Category	Garage Door Opener
Language	English