98
Set the machine as illustrated.
Turn the stitch width dial and stitch length
dial to suit the fabric.
Set stitch length control between
“1” - “2”.
Set stitch width control between
“3” - “5”. (model 55)
Set stitch width control between
“3” - “7”. (model 65/80e/90e)
Shell hem (1)
Pattern selector on “ “
For decorative edges.
Suitable for edges on sheer, fine and
stretch fabrics. The larger stitch should go
just over the edge of the fabric to create
the shell effect.
Rampart (2)
Pattern selector on “ “
For flat joining seams, sewing on elastic,
visible hems.
This stitch can be used for firm, thicker
fabrics.
Bridging (3)
Pattern selector on “ “
For seams, place mats, tablecloths.
Decorative joining seam for a fagotted
effect. Gathering with cord or shirring
elastic.
Scallop stitch (4)
Pattern selector on “ “
For a delicate edge finish along the edge of
fabric.
Practical stitchesEN
100
Set the machine as illustrated.
Turn the stitch width dial and stitch length
dial to suit the fabric.
Stitch length control “05 - 1”
Stitch width control “3” - “7”
(model 65/80e90e)
Stitch width control “3” - “5” (model 55)
For edges, tablecloths, bed linen, cuffs,
embroidery. For an attractive, decorative
effect, adjust the stitch width to maximum.
Embroidery thread adds to effect.
Square stitch (1)
Pattern selector on “ “
(model 55/65/80e/90e)
Decor stitch (2)
Pattern selector on “ “
(model 80e/90e)
Decorative stitches
EN
To Next Page
Loading...
Need help?
General
