Beurer MG 13 User Manual

4
NOTICE:
• Always use the size and type of battery indicated. The use of other batteries will damage the
device.
• Never use different types of batteries, battery brands or batteries with different capacities. This
may damage the unit. You should preferably use alkaline batteries.
• Never use rechargeable batteries. This may damage the unit.
• Always replace all batteries at the same time and use batteries of the same type.
• Replace weak batteries before they discharge completely.
• Leaking batteries may damage the device. If you do not intend to use the unit for longer peri-
ods, remove the batteries from the battery compartment before placing the device in storage.
5.1 How to change batteries
6. Operation
6.1 Parts and Contents
1. ON/OFF button
2. Cover
3. Battery compartment
4. Suction cups
6.2 Set up and use
1. Open the zip fastener on the cover.
2. Remove the cover from the Spa vibration massage pillow.
3. Carefully remove the battery compartment from the Spa vibration massage pillow. Make sure the battery
compartment cables are not damaged. Do not pull on the battery compartment cables.
4. Rotate the battery compartment in the direction of the “OPEN” arrow and remove the lid.
5. Place two AA batteries (included) into the battery compartment according to the markings. Ensure that
the correct battery polarity is observed.
6. Close the battery compartment by replacing the lid and rotating it in the direction of the “CLOSE” arrow.
C
L
O
S
E
O
P
E
N
C
L
O
S
E
O
P
E
N
C
L
O
S
E
O
P
E
N
1
2
3
ON/OFF
1
2
3
4
4

Beurer MG 13 Specifications

General

Brand	Beurer
Model	MG 13
Category	Massager
Language	English