Biostar A770E3 Bios Setup Manual

A770E3 BIOS Manual
32
Memory Configuration
BIOS SETUP UTILITY
vxx.xx (C)Copyright 198 5-200x, American Megatre nds, Inc.
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
+-
F1
F10
ESC
Memory Configurati on
Bank Interleaving [Auto]
Channel Interleavi ng [XOR of Addre ss bit]
Enable Clock to Al l DIMMs [Disabled]
MemClk Tristate C3 /ATLVID [Disabled]
Memory Hole Remapp ing [Enabled]
DCT Unganged Mode [Always]
Power Down Enable [Disabled]
Page Smashing [Disabled]
> ECC Configuratio n
Enable Bank Memo ry
Interleaving
Performance
Bank Interleaving
Bank Interleaving is an advanced chipset technique used to improve memory
performance. Memory interleaving increases bandwidth by allowing simultaneous
access to more than one piece of memory.
Options: Auto (Default)
Channel Interleaving
This item allows you to control the DDR2 dual-channel function.
Options: XOR of Address bits [20:16, 6] (Default) / XOR of Address bits
[20:16, 9] / Address bits 6 / Address bits 12 / Disabled
Enable Clock to All DIMMs
This item determines whether the BIOS should actively reduce EMI
(Electromagnetic Interference) and reduce power consumption by turning off
unoccupied or inactive DIMM slots.
Options: Disabled (Default) / Enabled
MemClk Tristate C3/ATLVID
This item enables or disables the MemClk Tristate function in C3 Mode.
Options: Disabled (Default) / Enabled

Biostar A770E3 Specifications

General

Brand	Biostar
Model	A770E3
Category	Motherboard
Language	English