To Next Page

To Previous Page

A780L M2G+/A780L M2L+/A780L BIOS Manual

3 PCIPnP Menu

This section describes configuring the PCI bus system. PCI, or Personal Computer

Interconnect, is a system which allows I/O devices to operate at speeds nearing the

speed of the CPU itself uses when communicating with its own special components.

Notice

z Beware of that setting inappropriate values in items of this menu may cause

system to malfunction.

BIOS SETUP UTILITY

Main Advanced PCIPnP Boot Chipset Performance

Select Screen

Select Item

Change Option

General Help

Save and Exit

Exit

F10

ESC

Clear NVRAM during

System Boot.

Advanced PCI/PnP Settings

WARNING: Setting wrong values in below sec tions

may cause system to m alfunction.

Plug & Play O/S [ No]

PCI Latency Timer [ 64]

Allocate IRQ to PCI VGA [ Yes]

Palette Snooping [ Disabled]

PCI IDE BusMaster [ Enabled]

> PCI Resource

Clear NVRAM [ No]

Exit

Clear NVRAM

This item allows you to clear the data in the NVRAM (CMOS) by selecting “Yes”.

Options: No (Default) / Yes

Plug & Play OS

When set to YES, BIOS will only initialize the PnP cards used for the boot sequence

(VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP operating

system like Window™ 95. When set to NO, BIOS will initialize all the PnP cards.

For non-PnP operating systems (DOS, Netware™), this option must set to NO.

Options: No (Default) / Yes

Biostar A780L Bios Setup Manual

Other manuals for Biostar A780L